DRAG BOX Launch Controller with Nitrous Control and TPS Aux Output

The DRAG BOX is a multi-stage throttle manipulator that lets you adjust what the ECM's see for pedal position during its stage activations. For example when on the transbrake or a power-brake situation many engine combinations do not like a 2 step. The bounces/flutters the engine does during this can be too much and can cause all kinds of issues like throwing accessory and/or supercharger belts, pulled out engine or transmission mounts or just rattle other components loose in either the engine compartment or other areas of the vehicle. Also the 2 step "misfire" condition that it is using to limit engine rpm might not be freindly to tune around or easy for your engine to pull out of cleanly. 

    This led us to think of this option. An addon non-invasive launch control that wires in and is adjustable with simple turn knobs on the control face. This staged and fully adjustable throttle manipulator is between your gas pedal and ECM that you can adjust for foot braking, transbraking as well as the actual ramp up timing between one of the stages and wot... all from simple turn knobs on the face of the box you have near you in the car. No laptop needed to adjust anything between rounds, or having to chance a programming issue like your interface not communicating or the worst is a failed tune halfway through a program that bricks your ECM. There are 4 knobs on the face of the box.

-Stage 1 adjustment - normally used for foot braking

-Stage 2 adjustment - normally used for transbraking

-Ramp Up - How fast does the power come in after the hit

-TPS activated SSR output control - Can use this for either our ELSD locking kits or extra fuel pumps, etc 

NOW!!! We did set this up to have a nitrous control output that hits right after the hit and the gas pedal is to the floor!!!

Ask us about this if you plan to run nitrous